Installation is Quick and Easy!

Step 1 Remove faucet Aerator and replace with Diverter Valve

First, remove the original Faucet Aerator. This is done by turning the Faucet Aerator counter-clockwise.

Step 2 Insert the 2 Sided Screw

Place the Fitting Pad inside the 2 sided screw. Screw the 2 sided screw clockwise until tight.

Step 3 Attach the Diverter Valve to the 2 Sided Screw

Attach the Diverter Valve to the 2 sided screw by turning the Diverter Vale clockwise until tight.

Step 5 Attach the Input and Output Hoses and Secure with Hose Clips Supplied

*Note: the input and output hose lenth is not cut, this allows you to choose the lenth you need.

1) Connect the Output Hose as shown in the picture below. Use the Hose Clamps supplied to secure the hose in place. One end of the Output Hose connects to the Out Port and the other end is placed into your sink to discharge the Acidic water.

2) Connect the Input Hose to the IN Port shown below. Use the Hose Clamps supplied to secure the hose in place. One end connects to the IN Port and the other end connects to the Diverter Valve.

Step 6 Plug in the Power Cord

Plug in the power cord and you are ready to begin enjoying Alkaline Ionized Water. It's that easy!